Rancang Bangun Sistem Otomasi untuk Indikator Penentuaan Jarak Objek Benda

Syafriwel Syafriwel, Muhammad Fadlan Siregar, Jhoni Hidayat, Ayu Fitriani


The distance to an object can be known without having to measure it with a meter. The design of this tool can determine an object with a certain position in the form of an indicator that is displayed automatically. An object is a part of determining indicators that can be used as receiving media for the final boundary reflection. With this tool, you can accurately determine the distance to objects without using conventional measuring instruments. The method used is to design the equipment and then test the tool. This tool works when there is input in the form of a password code via the keypad, and if the code or password is entered correctly, the microcontroller will provide high input to the relay to activate this solenoid which is run with the Arduino IDE software so that the microcontroller can detect keypad input properly, the delay is applied to activate the solenoid, by using the proximity sensor we know the accurate limit is for this tool to be able to read the distance of the object provided that the closest distance to the object is 0.5 meters and the farthest is 2 meters with a response time interval of 0.07 seconds to 2.10 seconds, this equipment controlled by Arduino with a listing program that has been set to read objects at a certain distance, with a reading distance. the program listing uses a sound indicator as an output with a sound indicator at a distance of approximately 2 meters.


object; automation system; password; seleniod and distance

Full Text:



Veigas, M.A., Shirke, L. M., Desai, S. S. dan Naik, S. R., Safety Automation System Using Pic Microcontroller, IJSTE, 2, 2017, hal.4-8.

Bob Violino. 2005. The History of RFID Technology

Mahali, Muhammad Izzuddi. 2016. Smart Door Locks Based on Internet of Things Concept With Mobile Backend as a Service. Jurnal : ELINVO, Vol. 1, No. 3, November 2017

Wilhusen, G. 2005. Information security key consideration related to federal implementation of Radio Frequency Identification Technology. United States Government Accountability Office, Washington.

Syafriwel “Analisis Ramalan Kebutuhan Beban Energi Listrik di Regional Sumatera Utara Tahun 2015-2019 dengan Metode Gabungan” Jurnal Teknovasi: Jurnal Teknik dan Inovasi, 2018

MF Siregar “ Sistem Pemutus Tiga Fasa Berdasarkan Pendeteksian Secara Otomatis “ JET (Journal of Electrical Technology), 2018.

M.M.A. Abdelaziz, M.F. Shaaban, H.E. Farag, and E.F. El-Saadany, “A Multistage Centralized Control Scheme for Islanded Microgrids With PEVs,” IEEE Transaction on Sustainable Energy, vol. 5, no. 3, pp. 927-937, July 2014.

X. Hou, Y. Sun, W. Yuan, H. Han, C. Zhong, and J.M. Guerrero, “Conventional P- ω/Q-VDroop Control.


Muhammad Yakob dkk, rancang bangun alat pendeteksi ketinggian permukaan air berbasis mikrokonroler arduino uno, jurutera, 2019.

DOI: http://dx.doi.org/10.33087/jepca.v5i2.75


  • There are currently no refbacks.

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.


Electrical Engineering Study Program, Faculty of Engineering, Batanghari University Jambi
Adress: Jl. Slamet Ryadi, Broni-Jambi, Kodepos: 36122, email: jepca.unbari@gmail.com

Creative Commons License This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.