Rancang Bangun Alat Pengupas Pinang Otomatis Berbasis Arduino Mega

Umirza Fadjar Arpan, Yosi Riduas Hais, Haerul Pathoni

Abstract


Stripping the betel nut using a machine is considered to be more effective than manually, based on this I designed an automatic betel nut peeler control device using Arduino Mega as a mechanical and electrical system controller. In the design of this tool using a hollow iron frame material with 40X40 mm, with a length of 130 cm and a width of 30 cm. Furthermore, this tool is planned to be able to work with a capacity of 20 Kg/hour. After all components are completed, it will proceed to the tool development process to be able to perform performance tests. After testing, stripping using the manual method takes a relatively longer time, which is 11 minutes. While using the machine only takes 6 minutes. In this test, 1 kg or 74 young betel nut, yellow areca nut, dry areca nut, and wet old areca nut were used.


Keywords


Arduino, Areca Peeler and Automatic Control System

Full Text:

PDF

References


Kemenkes. (2018). Budidaya Tanaman Pinang. Jakarta.

Badan Penelitian Dan Pengembangan Pertanian Pusat Penelitian Dan Pengembangan Perkebunan. (2012). Potensi Genetik Plasma Nutfah Pinang (Areca catechu) Di Provinsi Jambi. Warta Penelitian Dan Pengembangan Tanaman Industri, 1-4.

Pranata, A., Yohanes, & Satriardi. (2016). Perangkat Mesin Pengupas Buah Pinang Berbasiskan Metode Quality Fungction Deployment (QFD). JOM FTEKNIK , 1-5.

Syahroni, M., & Budijono, A. P. (2018). RANCANG BANGUN SISTEM MEKANIK MESIN PRESS SEPATU. JRM, 1-8.

Rodika, T. B. (2018). Rancangan Mesin Pembelah Buah Pinang Dengan Dua Mata Potong. MANUTECH, 59-63.

Fadil R, Myson, & Fadli E. Y. (2019). Rancang Bangun Tutup Pintu Otomatis dengan Menggunakan Arduino UNO / MEGA 2560. JEPCA, 6-10.

Ely P. Sitohang, D. J. (2018). Rancang Bangun Catu Daya DC Menggunakan Mikrokontroler ATmega 8535. Teknik Elektro dan Komputer, 135-141.

Tinkbox. (2005, February Sunday). Proximity Sensor/Switch. London, Inggris.




DOI: http://dx.doi.org/10.33087/jepca.v5i1.59

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

ADRESS JOURNAL:

JOURNAL OF ELECTRICAL POWER CONTROL AND AUTOMATION (JEPCA)
Electrical Engineering Study Program, Faculty of Engineering, Batanghari University Jambi
Adress: Jl. Slamet Ryadi, Broni-Jambi, Kodepos: 36122, email: jepca.unbari@gmail.com

Creative Commons License This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.