Analisa Pembangkit Listrik Tenaga Uap Skala Laboratorium Dengan Bahan Bakar LPG
Abstract
The steam turbine is an initial drive that converts the potential energy of steam into kinetic energy and is subsequently converted into mechanical energy in the form of a turbine shaft rotation, directly or with the help of a reduction gear, connected to the mechanism to be driven. In research to analyze the performance of a steam turbine using LPG gas as fuel. Where in this study using the results of wet steam to move the turbine shaft with variations in pressure (7Bar, 6Bar, 5Bar and 4Bar). So that the maximum result is 7 Bar, the steam mass obtained is 0.09 with a time of 1.5 hours by heating 15 liters of water, the steam power produced is 25.6 Watts, the shaft power is 18.01 Watts and the maximum electrical power produced is 20 Watts. the turbine work efficiency is 78.12% and the result is a generator efficiency of 25%.
Keywords
Full Text:
PDFReferences
Asy’ari Daryus, 2012, Termodinamika Teknik Volume 1, Universitas Pesada
Jakarta
Erna Rahyu Eko Wiriani, 2019, Analisa Pengaruh Beban Listrik Terhadap Efisensi Termal PLTU Payo Selincah Jambi, Sekolah Tinggi Teknologi Nasional Jambi.
Joko Purnomo, 2018, Analisa Pengaruh Load Capacity Pembangkit Listrik Tenaga Uap Tanjung Awar-Awar 350 MW Terhadap Efisiensi Turbin Generator QFSN-350-2 Unit 1. JTPM. Volume 07 No. 02.
Nurhani Amin, 2012, Sistem Proteksi Generator Turbin Uap, Universitas Tadulako, Palu. Jurnal Majalah Ilmiah Mektek.
Riyki Apriandi, Awqli Mursadin, 2016, Analisis Kinerja Turbin Uap Berdasarkan Performance Test PLTU PT. Indocement P-12 Tarjun, Fakultas Teknik Mesin Universitas Lambung Mangkurat. Jurnal SJME Kinematika Vol. 1, Juni PP.37-46.
Sunyoto, dkk, 2008, Teknik Mesin Industri Jilid, Direktorat Pembinaan Sekolah
DOI: http://dx.doi.org/10.33087/jepca.v4i1.46
Refbacks
- There are currently no refbacks.

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
|