Rancangan Bangun Turbin Mikrohidro Tipe Archimedes Screw Dengan Kapasitas Daya 560 Watt

Zainuri Anwar, Beta Saud Parsaroan, Edi Sunarso

Abstract


The performance of a micro-hydro turbine was influenced by several factors, namely the design and the enviromental. This study aims to obtain the appropriate design parameters for the manufacture of screw turbines. This research was focused on blade dimensions and turbine screw pitch distance. The calculations were performed using several screw turbine fixing formulations. The design results show that the optimum blade diameter and turbine pitch range are 0.213 m and 0.312 m at 0.2 m3 / s of turbine inlet water flow and 563.3 Watt turbine shaft output power. The turbine screw test results of the design were carried out in the river flow of Puri Kedaton Housing, Pematang Gajah Village, Rt 13, Jambi Province. The test results show that the highest turbine power occurs at 30 kg shaft loading with a turbine output power of 445 Watts and an efficiency of 78.9%.


Keywords


Screw turbine; Power; and Efficiency

Full Text:

PDF

References


H. Matalata, “Listrik mikro hidro berdasarkan Potensi debit andalan sungai batanghari kota jambi,” vol. 1, no. 1, pp. 1–6, 2018.

F. E. Yandra and S. U. Djufri, “Studi Awal Pemanfaatan Turbin Screw pada Aliran Sungai Kecil di Kota Jambi,” vol. 2, no. 1, pp. 29–32, 2019.

B. Moshfegh, “World Renewable Energy Congress – Sweden Editor,” 2011.

A. Lashofer et al., “State of technology and design guidelines for the Archimedes screw turbine,” no. March 2016, 2012.

P. Taylor, G. Müller, and J. Senior, “Simplified theory of Archimedean screws Simplified theory of Archimedean screws Théorie simplifiée de la vis d ’ Archimède,” no. December 2014, pp. 37–41, 2010.

A. T. Piper, P. J. Rosewarne, R. M. Wright, and P. S. Kemp, “The impact of an Archimedes screw hydropower turbine on fi sh migration in a lowland river,” Ecol. Eng., vol. 118, no. April 2018, pp. 31–42, 2020.

C. Rorres, “The Turn of the Screw : Optimal Design of an Archimedes Screw,” J. Hydraul. Eng. ·, pp. 72–80, 2000.

A. Nurdin, P. Magister, J. T. Mesin, U. S. Maret, J. T. Mesin, and U. S. Maret, “Kajian Teoritis Uji Kerja Turbin Archimedes Screw Pada Head Rendah,” vol. 9, no. 2, pp. 783–796, 2018.

D. Adanta and M. H. G. Syafei, “Development of Archimedes Turbine Research : Review Article,” pp. 177–181, 2017.

J. M. C. Cengel, Yunus A., Fluid Mechanics, 4th ed. McGraw-Hill.New York. USA, 2018.

Amir, “Kemiringan Optimum Model Turbin Ulir 2 Blade,” J. Tek. Mesin Univ. Muhammadiyah Tangerang, vol. 2, no. 1, pp. 1–8, 2018.

E. Saefudin, T. Kristyadi, M. Rifki, and S. Arifin, “Turbin Screw Untuk Pembangkit Listrik Skala Mikrohidro Ramah Lingkungan,” vol. I, no. 3, pp. 233–244, 2017.

I. G. W. Putra, “View of Analisa Pengaruh Tekanan Air Terhadap Kinerja PLTMH dengan Menggunakan Turbin Archimedes Screw.pdf,” vol. 17, no. 3, 2018.




DOI: http://dx.doi.org/10.33087/jepca.v4i1.43

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

ADRESS JOURNAL:

JOURNAL OF ELECTRICAL POWER CONTROL AND AUTOMATION (JEPCA)
Electrical Engineering Study Program, Faculty of Engineering, Batanghari University Jambi
Adress: Jl. Slamet Ryadi, Broni-Jambi, Kodepos: 36122, email: jepca.unbari@gmail.com

Creative Commons License This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.