Studi Awal Pemanfaatan Turbin Screw pada Aliran Sungai Kecil di Kota Jambi

Fadli Eka Yandra, S Umar Djufri

Abstract


The use of archimedes screw has shifted its use from pumps to a source of hydropower at low heads as water turbines. Archimedes srew turbine performance is influenced by several parameters including turbine submersion level, turbine tilt angle, pitch ratio, and number of blades. The contour of the lowland Jambi city that is passed by the Batanghari watershed makes the drainage potential can be utilized to become a small-scale hydroelectric power plant using screw turbines, because the contour of Jambi City is low, resulting in small water pressure although the discharge is sometimes large due to the overflow of the Batanghari river, then the choice of turbine with a low head is the solution, in this study, a study was made to calculate the potential drainage flow in the city of Jambi, whether it can be used or not.

Keywords


archimedes screw; turbine immersion; turbine tilt; pitch ratio; number of blades; air discharge.

Full Text:

PDF

References


A. Nurdin, “Optimalisasi Transmisi PLTA – Pico Hydro sebagai Penunjang Konversi EnergiMekanik Menjadi Listrik,” Universitas Sebelas Maret, Surakarta, 2016.

J. Rohmer, D. Knittel, G. Sturtzer, D. Flieller, and J. Renaud, “Modeling and experimental results ofan Archimedes screw turbine,” Renewable Energy, vol. 94, pp. 136–146, 2016.

M. Stefanizzi and B. Fortunato, “Experimental investigation and performance prediction modelingof The investigation 15th International and Experimental performance prediction modeling of asingle stage centrifugal pump operating as turbine a single stage cent,” Energy Procedia, vol. 126,pp. 589–596, 2017.

N. Dellinger and M. Dufresne, “Computational fluid dynamics modeling for the design ofArchimedes Screw Generator,” vol. 118, 2018.

H. B. Harja, H. Abdurrahim, S. Yoewono, and H. Riyanto, “Penentuan Dimensi Sudu dan SudutKemiringan Turbin Pada Turbin Ulir Archimedes,” vol. 36, no. 1, 2014.

C. Rorres, “The Turn of The Screw: Optimal Desibn of an Archimedes Screw,” no. January, pp. 72–80, 2000.

W. D. Lubitz, M. Lyons, and S. Simmons, “Performance Model of Archimedes Screw HydroTurbines with Variable Fill Level,” Journal of Hydraulic Engineering, vol. 140, no. 10, p.04014050, 2014

G. Dellinger, A. Terfous, and P. Garambois, “Experimental investigation and performance analysisof Archimedes screw generator,” vol. 1686, no. March, 2016.

K. Songin, “Experimental Analysis of Archimedes Screw Turbines,” 2017.

A. D. Nugroho and D. A. Himawanto, “Kajian Teoritik Pengaruh Geometri Dan Sudut Kemiringan Terhadap Kinerja Turbin Archimedes Screw,” Seminar Nasional Teknologi Informasi dan Kedirgantaraan (SENATIK), vol. III, pp. 2337–3881, 2017.

B. Yulistiyanto, H. Yul, and Lisdiyanti, “Pengaruh Debit Aliran dan Kemiringan Poros Turbin UlirPada Pembangkit Listrik Tenaga Mikro-hidro,” Dinamika Teknik Sipil vol. 12, no. 1, pp. 1–5, 2012.

T. Saroinsong, R. Soenoko, S. Wahyudi, and M. N. Sasongko, “Performance of three-bladedArchimedes screw turbine,” ARPN Journal of Engineering and Applied Sciences, vol. 11, no. 15, pp.9491–9495, 2016.

S. R. Waters, “Analysing the performance of the Archimedes Screw Turbine within tidal rangetechnologies,” no. November, pp. 1–171, 2015.




DOI: http://dx.doi.org/10.33087/jepca.v2i2.28

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Journal of Electrical Power Control and Automation (JEPCA)
Program Studi Teknik Listrik, Fakultas Teknik, Universitas Batanghari
Adress: Jl. Slamet Ryadi, Broni-Jambi, Kodepos: 36122, email: teknikjepca@gmail.com

Creative Commons License This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.