Pengolahan Lindi Tempat Pemprosesan Akhir Sampah Talang Gulo Dengan Metode Elektrolisis
Abstract
The Talang Gulo control landfill waste final processing site (TPA) has been decommissioned and converted into a Sanitary Landfill TPA in the city of Jambi. Even though it has been deactivated, the waste resulting from the decomposition of waste at the TPA control landfill must be managed. One of the wastes that is managed is leachate. Before being released into the environment, leachate must be processed in leachate ponds so that the receiving environment is not polluted. Some of the leachate parameters that must be managed are mercury (Hg) and cadmium (Cd), because if these two parameters enter surface water they will have a negative impact on aquatic biota. The research is planned at the Batanghari University Engineering Laboratory. On a laboratory scale, the Hg and Cd parameters of leachate can be reduced using the electrolysis method. Electrolysis is an alternative method for processing leachate because the chemical reaction process using electrodes can reduce the Hg and Cd parameters. The hypothesis that can be taken is that the electrolysis method can reduce the Hg and Cd parameters of landfill leachate.
Keywords
Full Text:
PDFReferences
Afandi, A.M.Rijal,I, & Aziz, T .(2017) “Pengaruh Waktu dan Tegangan Listrik Terhadap Limbah Cair Rumah Tangga Dengan Metode Elektrolisis,”Jurnal Teknik kimia,23(2), 114-119,
Badan standarisasi Nasional SNI 03-3241-1994, “Tentang Tata Cara Pemilihan Lokasi Tempat Pembuangan Akhir Sampah”.
Dinas Lingkungan Hidup Kota Jambi, 2019, Data Potensi Timbunan Sampah Kota Jambi Tahun 2019-2020-2019.
Isana,S.Y.L, “Perilaku Sel Elektrolisis Air dengan Elektroda Stainless steel”.,Prosiding Seminar Nasional Kimia & Pendidikan Kimia Yogyakarta 30 Oktober 2010.
Irhami, Pandia,S., Purba,E. & Hasan,W,“Kandungan Logam Berat pada Air Lindi Tempat Pembuangan Akhrir (TPA) Sampah Kota Banda Aceh”, 2017
DOI: http://dx.doi.org/10.33087/jepca.v6i1.102
Refbacks
- There are currently no refbacks.

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Journal of Electrical Power Control and Automation (JEPCA) |

