Tinjauan Awal Penyulang Palem di PT. PLN (PERSERO) UIWS2JB UP3 Jambi Menggunakan Software ETAP

Nj. Thamrin, Eko Suprapto, Hadi P

Abstract


power flow in an electric power system is an event that flows in the form of active power (P) and reactive power (Q) from a generating system (sending side) through a transmission line or network until it reaches the load side (receiving side). . This power flow analysis has complicated stages if done manually, which requires an ETAP program. ETAP (Electric Transient Analysis Program) is software used to analyze an electric power system. This research was planned in the electrical engineering laboratory, Faculty of Engineering, Batanghari University, while the data was obtained from PT PLN (Persero) UIWS2JB Jambi. The ETAP method can simplify the calculation of the power flow in the palm feeder at PT PLN (Persero) Jambi.


Keywords


Electric power, Distribution systems, ETAP software

Full Text:

PDF

References


Peraturan Pemerintah No.79 Tahun 2014”Tentang Kebijakan Energi Nasional Indonesia”

Keputusan Direksi PT. PLN (Persero) No.0357.K /DIR/ 2014,”Tentang Pedoman Penyambungan Energi Pembangkit Energi Listrik Terbarukan Ke Sistem Distribusi PLN”.

Willian D Stevenson,”Buku Analisa Sistem Tenaga” Penerbit Erlangga , Edisi ke-empat, Jakarta 1984. .

DR.A.Arismunandar,DR.S.Kuwahara“Buku Teknik Tenaga Listrik,”Penerbit Pradnya Paramita, 2000.

Ismail,sharmataha,Sopyan,“Optimasi jaringan distribusi listrik dengan pemasangan kapasitor pada jaringan tegangan menengah 6.3 KV PT. SemenTonasa,”Prosiding Seminar Nasional,NCIET http://conf.nciet.id/index.php/nciet/article/view/167/139




DOI: http://dx.doi.org/10.33087/jepca.v6i1.100

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Journal of Electrical Power Control and Automation (JEPCA)
Program Studi Teknik Listrik, Fakultas Teknik, Universitas Batanghari
Adress: Jl. Slamet Ryadi, Broni-Jambi, Kodepos: 36122, email: teknikjepca@gmail.com

Creative Commons License This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.